Chapters by Prof. Victor Songmene
-
Book Chapter
Effect of Casting Processes, Rare Earth Metals, and Sr Addition on Porosity Formation in Al-Si Cast Alloys
by Ehab Samuel, Agnes M. Samuel, Victor Songmene and Fawzy H. Samuel
in the book "Recent Advancements in Aluminum Alloys" edited by Shashanka Rajendrachari, ISBN 978-1-83768-509-7, Print ISBN 978-1-83768-508-0, InTech, January 1, 2024
-
Book Chapter
A Review on Fundamentals of Grain Refining of Al-Si Cast Alloys
by Ehab Samuel, Hicham Tahiri, Agnes M. Samuel, Victor Songmene and Fawzy H. Samuel
in the book "Recent Advancements in Aluminum Alloys" edited by Shashanka Rajendrachari, ISBN 978-1-83768-509-7, Print ISBN 978-1-83768-508-0, InTech, January 1, 2024
-
Book Chapter
Why Al-B4C Metal Matrix Composites? A Review
by Mohamed F. Ibrahim, Hany R. Ammar, Agnes M. Samuel, Mahmoud S. Soliman, Victor Songmene and Fawzy H. Samuel
in the book "Advances in High-Entropy Alloys - Materials Research, Exotic Properties and Applications" edited by Jiro Kitagawa, ISBN 978-1-83881-079-5, Print ISBN 978-1-83881-078-8, InTech, September 9, 2021
-
Book Chapter
Machining Burrs Formation & Deburring of Aluminium Alloys
by Seyed Ali Niknam, Yasser Zedan and Victor Songmene
in the book "Light Metal Alloys Applications" edited by Waldemar A. Monteiro, ISBN 978-953-51-1588-5, InTech, June 6, 2014
-
Book Chapter
Global Machinability of Al-Mg-Si Extrusions
by V. Songmene, J. Kouam, I. Zaghbani, N. Parson and A. Maltais
in the book "Aluminium Alloys - New Trends in Fabrication and Applications" edited by Zaki Ahmad, ISBN 978-953-51-0861-0, InTech, December 12, 2012
-
Book Chapter
Dry, Semi-Dry and Wet Machining of 6061-T6 Aluminium Alloy
by J. Kouam, V. Songmene, M. Balazinski and P. Hendrick
in the book "Aluminium Alloys - New Trends in Fabrication and Applications" edited by Zaki Ahmad, ISBN 978-953-51-0861-0, InTech, December 12, 2012
-
Book Chapter
An Approach-Based on Response Surfaces Method and Ant Colony System for Multi-Objective Optimization: A Case Study
by Barthélemy H. Ateme-Nguema, Félicia Etsinda-Mpiga, Thiên-My Dao and Victor Songmene
in the book "Manufacturing System" edited by Faieza Abdul Aziz, ISBN 978-953-51-0530-5, InTech, May 5, 2012
-
Book Chapter
Machining and Machinability of Aluminum Alloys
by V. Songmene, R. Khettabi, I. Zaghbani, J. Kouam, and A. Djebara
in the book "Aluminium Alloys, Theory and Applications" edited by Tibor Kvackaj, ISBN 978-953-307-244-9, InTech, February 2, 2011